WB FR DW 820 Series Standard for Drywall

The WB-FR Standard Access Door with a tape in flange allows for a trimless appearance to eliminate visual distraction.

Construction Specifications:
Door: 18 ga. steel
Frame: 16 ga. steel, 1” wide perforated flange of 24 ga. galvanized material for mounting purposes, 2 1/2” deep
Insulation: 2" thick mineral wool (THERMAFIBER®), in between
two pieces of 22 ga. steel
Hinge: Fully concealed, pivot rod type hinge. Allows opening to 140°
Latches: Self-latching direct action latch, accepts both key and knurled knob
Automatic Panel Closer: Furnished on all doors. Vertical position only. Ceiling position requires self-assisted closing
Inside Panel Release: Furnished on all doors
Finish: Grey baked enamel coat
Ceiling Installation: To comply with current fire regulations, largest size acceptable is 24" x 36"

OPTIONS: (AT EXTRA COST)
Finishes:
❑ Stainless Steel Type 304 No. 4 Satin Finish Brushed
❑ Stainless Steel Type 316 No. 4 Satin Finish Brushed
Options:
❑ Mortise Best Lock
❑ Ultra lock
❑ Hot Smoke Seal gasketing all 4 sides**
❑ Special sizes available

WB FR DW 820 Series Standard for Drywall Fire-Rated Access Door

WB FR DW 820 Series Standard Access Door for Drywall

Certification and Approval

Model No. Door Size Wall Opening Slam Catch Shipping Wt Lbs. Cad File
FR DW 820 12 x 12 121/4 x 121/4 1 12
FR DW 820 14 x 14 141/4 x 141/4 1 14
FR DW 820 16 x 16 161/4 x 161/4 1 17
FR DW 820 18 x 18 181/4 x 181/4 1 19
FR DW 820 24 x 24 241/4 x 241/4 1 30